Asenware AW-D120 is an intelligent addressable sounder base for addressable detector (Model A) and conventional detector(Model B), which can be configured with Asenware AW-FP100 Series Addressable Fire Alarm Control Panel. Each point (device) can be given specific ID, which allows the panel to continuously monitor specific addressable sounder base location (point) and give a visual and audible signal when panel enters fire alarm condition.
Addressable Strobe Sounder Base characteristics
- Loop powered sounder
- LED indicator
- Two wire connection (easy to install)
- Can be used as a detector base
- Meet all requirement of EN 54-3:2014
Addressable Strobe Sounder Base Technical Parameters
| Model |
AW-D120 (A for addressable detector, B for conventional detector) |
| Operating voltage |
20~28VDC @Loop |
| Operating current[@Loop 24VDC] |
Standby statuss7 mA, Alarm statuss60mA with addressable detector; Alarm statuss70mA with conventional detector; |
| Wiring |
The promise of two bus system (Loop in, Loop out) |
| Alarm SPL |
≥65dB @3m |
| Environmental |
Temperature range: -10~50°C (14~122°F) Humidity: 5 to 95% RH, non-condensing |
| Mating host |
AW-FP100 series fire alarm control panel |
| Size |
130mm*31.2mm |
| Weight |
About 145g |