Fire Alarm System Inspection Testing and Maintenance

Fire Alarm System Inspection Testing and Maintenance

Views : 1091
Update time : 2023-05-06 16:03:43

Use a special testing instrument to comprehensively test the action of the detector in stages and batches and confirm the display of the light, and test whether the action of the smoke detector and heat detector is sensitive.

2. Check whether the main control screen is normal, whether the detector action in a certain area is correctly displayed when there is an alarm signal, and whether the alarm bell buzzes.

3. Test the manual call point alarm button, whether the alarm bell can be activated, and whether the alarm area displayed by the fire center is correct.

4. Check whether the input and output display functions of the main control panel and linkage control panel are normal, and clean and maintain them thoroughly.

5. Check whether the communication and control signals between each interface (module) and the peripheral equipment of the system are normal, check whether the output voltage of the interface (module) is normal.

6. Check the working status of the working battery pack and charger, and check whether the voltage and other parameters of the spare battery meet the requirements.

7. Check whether all terminals of the system equipment are loose, damaged or fall off.

8. Carry out 1-2 charge and discharge tests on the backup power supply, and 1 to 3 times the automatic switching test of the main and backup power supplies regularly.

9. Clean the smoke detectors and heat detectors regularly, clean them if necessary, make sure that the alarming is sensitive.

10. Check regularly whether there are garbled characters in the control program of the alarm panel, make sure the normal function of the panel.

11. Test whether the grounding resistance of the alarm system meets the requirements, and make records regularly.
Related News
What is Fire Hose? What is Fire Hose?
Oct .13.2023
A fire hose is a highly pressurized hose that is used to bring water to the fire. It may also transport flame retardants. Fire hoses can be attached to either a fire engine or a fire hydrant, and the pressure is between 800 and 2000 kPa. For reasons of fire safety, it's quite important to have a fire hose inspection as well as all fire protection equipment tested.  If, during a fire emergency, the fire hose fails it could have disastrous results.
What is Water-proof Fire Alarm System? What is Water-proof Fire Alarm System?
Sep .15.2023
Waterproof Heat Detector
Fixed Temperature Waterproof Heat Detector, the detector uses a bi-metallic strip to sense temperature change, therefore consuming minimal standby current and providing high reliability.
The Detector is particularly suited to environments, which are exposed to high levels of condensation or are hosed down. The detector has a wide operating margin allowing it to respond to both slow and fast increases in temperature; it can also sense temperature reliably in a horizontal or vertical position.
Addressable Explosion-proof Fire Alarm System Introduction Addressable Explosion-proof Fire Alarm System Introduction
Aug .08.2023
The Explosion Proof range of products has been designed to provide protection against explosions and products to ensure that all major advantages of high-quality fire detection technology can be safely exploited in industrial and hazardous environments. Many difficult sites such as metal, paint, pipelines, chemical, pharmaceutical, oil refineries, and other installations are vulnerable to the risk of explosion. In order to protect the assets and people, they need special solutions for fast and reliable fire detection.
Emergency Lighting System Installation Guide Emergency Lighting System Installation Guide
Jul .20.2023
Emergency lighting system is divided into centralized controlling and non-centralized controlling type, or centralized power supply and non-centralized power supply type. This article talks about emergency lighting system, power supply, emergency light controller installation guide.